Dhuumaha FRP oo isku dhafan | FRP cable saxaarad | Salaanka fiilada FRP | GRE RTRC CONDUIT
Tilmaamaha Alaabta:
| Walxaha | PVC/FRP | PP/FRP | CPVC/FRP |
| Kahortagga fidinta kordhinta (Mpa) | ≧140 | ≧70 | ≧120 |
| Qaloocinta niyadda (Mpa) | ≧180 | ≧95 | ≧180 |
| Isku xidhka kulaylka balaadhinta (10-6/℃) | 32 | 68 | 32 |
| Isku xidhka kulaylka (MK) | ≧0.59 | ≧0.59 | ≧0.59 |
| Heerkulka hawlgalka wakhtiga dheer (℃) | -25 ~ 85 | -25 ~ 120 | -25~+105 |
| Ku tijaabi kulaylka iyo qabowga beddelka (-40℃ ~ 80℃) ≧100 jeer | Lakab kala goyn | Lakab kala goyn | Lakab kala goyn |
| Saamaynta ka-hortagga (KV/mm) | 20 ~ 40 | 20 ~ 40 | 20 ~ 40 |
| Saamaynta lidka ku ah saamaynta (KJ/m2) | ≧21.5 | ≧21.5 | ≧21.5 |
| Goynta lidka ku ah lakabyada (Mpa) | 8.5 | 4.5 | 8.5 |
Sawirada Alaabta:
Warqadda xogta farsamada ee isku dhafan ee FRP:
| Cabirka DN |
R |
H1 |
H2 |
H3 |
H4 |
C |
| DN15 | 45 | 95 | 60 | 90 | 100 | 25 |
| DN20 | 60 | 110 | 65 | 100 | 110 | 25 |
| DN25 | 65 | 120 | 75 | 110 | 135 | 25 |
| DN32 | 80 | 140 | 85 | 120 | 140 | 30 |
| DN40 | 80 | 155 | 100 | 150 | 150 | 40 |
| DN50 | 150 (75) | 240 (150) | 125 | 170 | 150 | 50 |
| DN65 | 180 (98) | 280 (150) | 140 | 180 | 160 | 50 |
| DN80 | 240 (120) | 340 (200) | 150 | 190 | 170 | 50 |
| DN100 | 150 | 250 | 170 | 200 | 180 | 60 |
| DN125 | 180 | 300 | 200 | 245 | 180 | 70 |
| DN150 | 220 | 350 | 225 | 260 | 200 | 80 |
| DN200 | 300 (200) | 475 (375) | 225 | 300 | 230 | 100 |
| DN250 | 375 (250) | 565 (440) | 280 | 320 | 250 | 100 |
| DN300 | 450 (300) | 600 (450) | 305 | 350 | 300 | 100 |
| DN350 | 530 (350) | 750 (600) | 340 | 400 | 350 | 120 |
| DN400 | 600 (400) | 850 (650) | 400 | 410 | 350 | 120 |
| DN450 | 675 (450) | 900 (700) | 440 | 450 | 400 | 130 |
| DN500 | 750 (500) | 1000 (750) | 485 | 500 | 400 | 130 |
| DN600 | 900 (600) | 1200 (900) | 550 | 600 | 450 | 130 |
| DN700 | 1050 (700) | 1400 (1050) | 650 | 700 | 500 | 150 |
| DN800 | 1200 (800) | 1600 (1200) | 700 | 800 | 500 | 150 |
Sharaxaad:
1.90 xusullada, raadiyaha laabashada: R=1.0DN;R=1.5DN;R=3DN.
2.haddii DN>200, radius laab la soo jeediyay waa R=1.0DN
3.haddii 200≥DN≥80, la soo jeediyay laacibka:
4.Haddii DN<80, kulaylka qaloocin u baahan in la marsado. Laabicisku wuxuu noqon karaa R=3DN, ama iyadoo la isticmaalayo qaybo caag ah oo la isku duro.
5. Haddii dhexroorka labada dhamaadka ee taper-ku uu ka yar yahay labanlaab dhexroorka, dhererka taperku waa H3; Haddii kala duwanaansho ka weyn tahay saddexleyda dhexroorka, dhererku waa 1.5-1.8 jeer H3.
6.Qalabka aan caadiga ahayn iyo kuwa gaarka ah ayaa la soo saari karaa iyadoo loo eegayo sawirka ama naqshadeynta.
7.Flanges size D,D1,D2 waxaa lagu dooran karaa si waafaqsan HG20592-20635-97 (Steel flange, dhaqida, xidhe)
Sharaxaada Alaabta:
Waxqabadka ka-hortagga daxalka iyo gabowga oo aad u fiican. iska caabbinta socodka hoose, tamarta badbaadinta
Jilicsanaan aad u wanagsan oo ku hareeraysan qabow, oo leh wax qabad ka hortag ah oo heersare ah
Xoojinta sare, waxqabadka ka hortagga cadaadiska oo wanaagsan
Kordhi heerkulka hawlgalka, hoos u dhigay isku-xidhka kulaylka fidinta
Insulator heer sare ah oo koronto ah, ma jiro daxalka korantada.
ka fudud Waa kaliya 1 / 4-1 / 6 ee tuubooyinka birta.
